Purity & pH of Expandable Graphite: How They Affect Flame-Retardant and Sealing Performance

Nov 18, 2026

Leave a message

First, clarify: What exactly does "pure impurity" refer to in expandable graphite

 

Expanded graphite is not pure carbon powder, it is an intermediate of natural flake graphite after intercalation, oxidation, water washing, and drying. The so-called 'purity' should be viewed in three layers:

Indicator Representative significance Typical Range
Fixed Carbon Effective carbon skeleton content 85%–99.9%
Ash Inorganic residues such as silicates and metal oxides Conventional ≤ 1%, high-purity ≤ 0.5%
Sulfur Residual intercalation acid Normal ≤ 1000ppm, low sulfur ≤ 500ppm, sulfur free grade<100ppm
Moisture Storage and processing stability ≤1.0%

Carbon is the "expandable substance", ash is the "impurity that cannot expand and still lags behind", and sulfur and acid are the "hidden costs that will cause trouble in the later stage".

 

How does purity affect flame retardancy

 

1. The higher the fixed carbon, the denser and more heat-resistant the expanded carbon layer

After being heated (usually expanding at 180-220 ℃), expandable graphite undergoes interlayer intercalation agent gasification, resulting in a volume expansion of 100-400 times, forming a worm like porous carbon layer that relies on "physical barriers" to isolate oxygen and heat.

  • High carbon content: After expansion, the carbon skeleton is continuous, the pores are uniform, and the thermal and oxygen insulation effects are good
  • High ash content: After puffing, a large amount of inorganic residue is left behind, and the carbon layer is brittle and prone to falling off, which can be easily penetrated by flames

 

2. Ash impurities → Smoke toxicity and electrical performance risks
High end scenarios (electronics, batteries, car interiors, tunnel fire prevention) are sensitive to smoke density and ion migration:

  • High ash content may introduce alkali/heavy metal ions
  • Adding smoke and affecting insulation during combustion
  • Export products are prone to triggering RoHS/REACH compliance risks

So high-purity grade (ash content ≤ 0.5%, fixed carbon ≥ 99%) is not a "premium gimmick", but a flame retardant safety margin.

 

3. Sulfur residue → "chronic corrosion source" in flame retardant formula

The sulfuric acid system has low intercalation cost and good rate, but residual sulfur will:

  • Generate acidic substances that corrode metal inserts, copper foils, and flanges
  • Causing insulation degradation in electronic/electrical scenarios
  • After long-term aging, a "white frost" will precipitate on the surface

Making fireproof sealing strips may still be tolerable; To make flame-retardant boards with metal structures, battery pack fireproof pads, and electrical enclosures, sulfur control (≤ 500-1000ppm or lower) is necessary.

 

PH value: an underestimated 'compatibility indicator'

 

The pH of expandable graphite aqueous solution is commonly 3-7. Slightly acidic, indicating that the intercalation acid has not been thoroughly washed.

1. The influence of pH on flame retardant composite materials

  • PH ≤ 3 (residual strong acid)
  • Catalytic resin/rubber degradation during mixing
  • Polyurethane foam system is prone to "premature reaction", foaming, and abnormal curing
  • Accelerate substrate aging
  • PH 3-6 (weak acid)
  • Most universal flame retardant scenarios are available
  • But there is still a long-term risk of corrosion for metal contacts
  • PH 6-7 (near neutral)
  • Good compatibility with plastic/rubber/epoxy
  • Suitable for high-end sealing, electronic, and food grade equipment

 

2. The influence of pH on sealing products
The production process of flexible graphite gaskets, graphite paper, and packing is as follows:
Puffing → Worm graphite → Roll pressing/compression molding
If the raw material is acidic:

  • Long term contact between molds and roller surfaces can cause corrosion
  • Rust on the edges of the metal reinforcement layer (stainless steel punching plate, mesh)
  • Gaskets release acidic substances in high-temperature steam/oil media, contaminating pipelines

So sealed grade expandable graphite usually requires a pH of 5-7, with low sulfur and near neutral as standard. That's also why many overseas gasket factories specifically measure pH and sulfur in incoming material inspection, rather than just looking at carbon content.

 

How purity and pH jointly determine 'sealing performance'

 

Application scenarios Purity requirements PH requirement Reason
Fireproof sealing strip Fixed carbon ≥ 90%, ash content ≤ 1% 4–7 Expansion force is required, allowing for a certain amount of impurities
Flexible graphite paper/board Fixed carbon ≥ 99%, ash content ≤ 0.5% 5–7 Rolling forming, ash content affects strength and surface
Pipeline flange gasket Low sulfur ≤ 500ppm 6–7 Anti flange/bolt corrosion
Electronic/battery fireproof pad 99.9%C, Sulfur<100ppm 6–7 Insulation, low ion pollution
General flame retardant coating 85-95% C is acceptable 3–6 Cost priority, dispersion priority

Core Logic:

  • Flame retardancy depends on the quality of the expanded carbon layer → high carbon content, low ash content, and controllable sulfur content
  • Sealing for long-term stability and compatibility → Near neutral, low sulfur, low corrosion

 

End

 

  • Purity determines whether the expansion is good or not: high carbon content and low ash content → strong carbon layer; Low sulfur → non corrosive.
  • The pH determines that "it cannot be obtained from the system": acid tends to damage the substrate, mold, and metal; Near neutrality is stable.
  • Flame retardant relies on expansion, sealing relies on stability; The intersection of the two is "high-purity+low sulfur+near neutral" expandable graphite.
Send Inquiry